Pfaff powerquilter 16.0 Manual - Page 26

System Information Serial Number HA000000076 Type C-Pod Board 2.00 Firmware 3.22 Handles 2.00 2.01 Stitch Counters Lifetime Project 000000000 000000000 Back Main Figure 32 0 mr m+ mc % C CE √ ÷ 78 9 x 4 5 6 __ 123+ +/- 0 . = Back Main Figure 33 System Information Screen The serial number of the machine is displayed at the top of the System Information screen. This number matches the one found on the label at the back of the machine. Information contained in the white boxes below the serial number identifies the electronics board revision numbers as well as the firmware revision numbers of the powerquilter™ 16.0 quilting machine and its handlebars. The Lifetime and Trip (or project) stitch counters count the number of stitches the machine is performed. The Lifetime count is the total number of stitches made since the machine was built. The Trip Counter can be reset to keep track of the number of stitches made during a given project. To reset this counter, press the "Reset" button found aligned with the Trip counter. The Lifetime counter cannot be reset and should be used as an indicator to determine when general machine maintenance should be performed by an authorized PFAFF® Representative. (Figure 32) Press the "Main" button to return to the "Main" menu screen or the "Back" button to return to the "More" menu screen. Calculator Screen A basic six-function calculator is provided for your convenience. (Figure 33) The functions provided are addition, subtraction, multiplication, division, square root and percent. The delete key on the top right may be used to delete a digit mistakenly entered. Press the "Main" button to return to the "Main" menu screen or the "Back" button to return to the "More" menu screen. Page 26