Philips AD7000W/37 User Manual - Page 11

English 3 Prepare Always follow the instructions in this chapter in sequence. Connect power Caution Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Before you connect the AC adaptor, make sure that you have completed all the other connections. Turn AD7000W on 1 Press on the back to turn the unit on. 2 Wait for successful boot-up of the unit. » The boot-up takes about 35 seconds. » During boot-up, the Wi-Fi SETUP indicator on the back of the unit blinks green quickly. » After boot-up, if no Wi-Fi connection has been set up for AD7000W, the Wi-Fi SETUP indicator starts to blink green slowly. To switch the unit to Eco standby mode, press again. To switch the unit on from Eco standby mode, press again. Tip If the unit stays idle for more than 30 minutes, the unit turns off automatically.You can change this setting on the Philips Fidelio application available on the App Store. It is a free application offered by Philips. Connect the AC power cord to the DC IN socket on the back of the unit. the wall power socket. EN 11