Philips AD7000W/37 User Manual - Page 22
Update firmware, Download the update file, Update from the configuration - firmware update
View all Philips AD7000W/37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6 Update firmware Note www.philips.com/suppor t XXXX XXXX. zip 1 On your PC/Mac, go to www.philips.com/ suppor t. 2 3 Update from the Warning Always connect your AD7000W to AC power for Note To use an Internet browser other than Apple Safari on your PC/Mac, remember to go to the Wi-Fi router your AD7000W. See the user manual of your Wi-Fi connected to the Wi-Fi router. 1 Power on AD7000W (see 'Turn AD7000W on' on page 11). » It takes about 35 seconds for the unit to boot up. During boot-up, the WI-FI SETUP indicator on the back of the unit blinks green quickly. » After boot-up, you can hear a beep and the WI-FI SETUP indicator turns to green steadily. AD7000W is network automatically. 2 Make sure that AD7000W and your PC/ Mac are connected to the same Wi-Fi router. 3 Open Apple Safari on your PC/Mac, then select 'Philips_Fidelio XXX' from the Bonjour pull-down list. Or open any other Internet browser on your PC/Mac, then type in the IP address of AD7000W (available on at the address bar. » web page is displayed. 22 EN