Philips DVP3570 User manual - Page 10
Connection to an Audio System, Connecting to RF Modulator Not Supplied
UPC - 609585188402
View all Philips DVP3570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
CONNECTIONS Connecting to RF Modulator (Not Supplied) If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using an RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Set your RF modulator's channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator / antenna switch, set it according to the manual supplied with the RF modulator. 4) Plug in the power cords of the devices to the AC outlet. 5) Turn on your TV and choose the same channel as you set the RF modulator's channel 3/4 switch to. For more details, follow the manual supplied with the RF modulator. rear of this unit VHF / UHF antenna or ccoamblpeaTnVy video cable rear of TV audio cable rear of your RF modulator ANT. IN RF coaxial cable RF coaxial cable 3 4 ANT. IN CHANNEL R L AUDIO IN VIDEO IN TO TV Set channel 3 or 4 Note: • RF modulator is not supplied with this unit. You need to purchase it at your local store. • The quality of picture may become poor if this unit is connected to an RF modulator. Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information. 2 Channel Analog Audio Connection stereo system AUDIO IN R L Digital Audio Connection AV receiver/amplifier audio DIGITAL AUDIO INPUT COAXIAL analog audio input jacks audio cable this unit digital audio coaxial input jack digital audio coaxial cable AUDIO OUT Connection Setting Setup > Audio> Digital Out Connecting to a Dolby Digital decoder for Dolby Digital audio output. Bitstream Connecting to the other device (an MD deck or DAT deck etc.) without Dolby Digital decoder. LPCM * To complete these settings, refer to pages 22. DIGITAL AUDIO OUT (COAXIAL) Note: • The audio source on a disc in a Dolby Digital multi-channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By hooking this unit up to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi-channel surround sound as heard in the movie theaters. • Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers. • "Digital Out" setting is not available while HDMI audio is output. 10 EN