Philips FWD798 User manual - Page 14
English, Using S-Video In jack, Using an accessory RF modulator
View all Philips FWD798 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English Connections Using S-Video In jack ● Use the S-Video cable (not supplied) to connect the system's S-VIDEO jack to the S-Video input jack (or labeled as Y/C or SVHS) on the TV set. ● To listen to TV channels through this system, use the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV set. ● Deactivate Progressive Scan through SYSTEM MENU. Refer to "Using the Setup Menu- Using Progressive Scan to improve image quality". IMPORTANT! - If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator ● Use the composite cable (yellow) to connect the system's VIDEO jack to the video input jack on the RF modulator. ● Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV's RF jack. ● Deactivate Progressive Scan through SYSTEM MENU. Refer to "Using the Setup Menu- Using Progressive Scan to improve image quality". 14