Pioneer 507CMX Operating Instructions - Page 21
Power cord connection - 50
UPC - 012562824390
View all Pioneer 507CMX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
English Français Power cord connection Connect the power cord after all component connections have been completed. AC IN Installation and Connections Note Regarding the audio cable, attach the supplied ferrite core. Wind the audio cable (not supplied) around the ferrite core once, and then fasten the catch. If you do not do this, this monitor will not conform to mandatory FCC standards. Audio cable (not supplied) 1 Ferrite core 2 1 Connect the power cord to this unit. 2 Plug the power cord into a power outlet. CAUTION ÷ Use only the power cord provided. ÷ The wall outlet used to provide electricity to this unit should be as close as possible to the unit and within easy reach of the user. In the event that it is necessary to disconnect power to the unit, first turn off the main unit's power switch, and then disconnect the power cord from its wall outlet. ÷ For the Plasma Display, use a three-core power cord with a ground terminal. Always be sure to connect the power cord to a three-pronged grounded outlet and make sure that the cord is properly grounded. If you use a power source converter plug, use an outlet with a ground terminal and screw down the ground line. NO! Do not use a power supply voltage other than that indicated (AC 100 V to 120 V, 50 Hz/60 Hz) as this may cause fire or electric shock. Installation and Connections 15 En