Pioneer 507CMX Operating Instructions - Page 22
How to route cables - - pdp
UPC - 012562824390
View all Pioneer 507CMX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
English Installation and Connections How to route cables Speed clamps are included with this unit for bunching cables together. Once components are connected, follow the following steps to route cables. * As viewed from the rear of the display. 12 Installation and Connections 1 Organize cables together using the provided speed clamps. Insert 1 into an appropriate hole on the rear of the unit, then snap 2 into the back of 1 to fix the clamp. Speed clamps are designed to be difficult to undo once in place. Please attach carefully. To attach the speed clamps to the main unit Use the holes marked with the & sign as needed. 2 Bunch separated cables together and secure them with the provided bead bands. Do not allow excessive stress to be placed on the ends of cables. Note Cables can be routed to the right or left. * As viewed from the rear of the display. PDP-507CMX Connect the speed clamps using the 4 holes marked with "‡" below, depending on the situation. PDP-607CMX To remove speed clamps Using pliers, twist the clamp 90° and pull it outward. In some cases the clamp may have deteriorated over time and may get damaged when removed. 16 En