Pioneer 507CMX Operating Instructions - Page 45
General problems, Problems commonly mistaken as breakdown - plasma tv
UPC - 012562824390
View all Pioneer 507CMX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
English Additional Information General problems Problem • No power. • Unit cannot be operated. • Remote control does not operate. • Picture is cut off. • Strange color, light color, or dark, or color misalignment. • Power is suddenly turned off. • No picture. Possible Solution • Is the power cord disconnected? (page 15) • Has the MAIN POWER switch been switched on? (pages 9 and 10) • External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after first turning the MAIN POWER off/on, or unplugging the power cord and re-plugging it in after 1 to 2 minutes. • Are batteries inserted with polarity (+, -) correctly aligned? (page 8) • Are batteries worn out? (Replace with new batteries.) • Is any object occluding the remote signal receiver? (page 8) • Point the remote control unit toward the remote signal receiver when operating (page 8). • Is the selected screen size correct? Switch to another screen size (page 21). • Are [SCREEN] mode adjustments such as picture size made correctly? (pages 21 to 22 and 27 to 28) • Is the POINT ZOOM function being used? (page 22) • Adjust the picture tone (page 25). • Is the room too bright? The picture may look dark in a room that is too bright. • The unit's internal temperature has increased. (Air vents are blocked.) Remove any objects blocking vent or clean (page 37). • Is the [POWER MGT.] function set to [ON]? (page 24) • Is connection to other components correct? (pages 13 to 14) • Has setup been done correctly after connection? (pages 17 to 18) • Is the correct input selected? (page 19) • Is a non-compatible signal being input? (pages 42 to 44) • Is the [PICTURE] setting correct? (page 25) Problems commonly mistaken as breakdown Problem • The screen is displayed in a small size. • Letter breakup on screen. • A sharp sound is sometimes heard from the cabinet. • Bright portions of image appear to be losing intensity. • Speckles or noise appears on screen. • Stripes appear on the screen. • Sound is heard from inside the unit. • Fan speed changes. • ON (green) indicator doesn't light. Possible Solution • Is the correct screen size selected? (pages 21 to 22 and 27 to 28) • Adjust using [SCREEN] mode on the menu screen (pages 27 to 28). If there is still no improvement, this unit may be limiting the displayable range. Check the Computer signal compatibility table (pages 42 to 44). • Expansion/contraction caused by surrounding temperature change may result in sound being heard from the cabinet. This is not a malfunction. • When the video input signal's level is too high, the bright portions may appear to be losing their intensity. Increase the adjustment level of the contrast and check the picture (page 25). • May be caused by radio wave interference from appliances with motors such as hair dryers, electric vacuum cleaners, electric power drills, ignition systems of cars, motorcycles etc., switch devises such as thermostats etc., neon signs or electrical discharge from power lines etc. • May be caused by radio wave mingling from TV station, FM station, amateur radios, public radios (simplified radios) etc., or a nearby personal computer, TV, or video/audio component. • A strong electromagnetic field may cause picture distortion and similar problems. • Normal sound of the cooling fan and internal sliding parts of the Plasma Display panel. Not a malfunction. • Fan speed changes automatically in accordance with ambient conditions. Not a malfunction. • The ON indicator may not light in some cases, depending on the settings performed by the installer. Consult with your installation technician. Additional Information 39 En