Pioneer AVH-P6300BT Owner's Manual - Page 55
Boosting the bass, Using the high pass filter, Adjusting source levels
UPC - 884938122740
View all Pioneer AVH-P6300BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Menu operations Section 14 Menu operations Boosting the bass You can boost the bass level. 1 Display the audio function menu. Refer to Introduction of menu operations on page 52. 2 Touch c or d to select a desired level. Range: 0 to +6 Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Display the audio function menu. Refer to Introduction of menu operations on page 52. 2 Touch c or d next to Frequency to select cut-off frequency. Off (off)-50Hz-63Hz-80Hz-100Hz- 125Hz Only frequencies higher than those in the selected range are output from the front or rear speakers. 3 Touch Source Level Adjuster on the audio function menu. 4 Touch a or b to adjust the source volume. Range: +4 to -4 Notes ! The AM volume level can also be adjusted with this function. ! Video CD, CD, compressed audio and DivX are automatically set to the same source level adjustment volume. ! iPod and USB storage device are automatically set to the same source level adjustment volume. ! External unit 1 and external unit 2 are automatically set to the same source level adjustment volume. Adjusting source levels With SLA (source level adjustment), the volume levels of each source can be adjusted to prevent significant differences between sources. ! Settings are based on the FM volume level, which remains unchanged. 1 Display the audio function menu. Refer to Introduction of menu operations on page 52. 2 Compare the FM volume level with the level of the source you wish to adjust. En 55