Pioneer AVH-P6300BT Owner's Manual - Page 63
Switching the warning tone, Setting the rear view camera, back up camera, Setting the video signal
UPC - 884938122740
View all Pioneer AVH-P6300BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Menu operations Section 14 Menu operations 3 Touch the Display Tilt keys to adjust the LCD panel to an easily viewable angle. Laying the panel down. Returning the panel to the upright position. # As the set angle is saved, the LCD panel will automatically be adjusted to the same position the next time the LCD panel is opened. Switching the warning tone If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. You can turn off the warning tone. 1 Display the system menu. Refer to Introduction of menu operations on page 52. 2 Touch DT.WARNING to turn the warning tone on. # To turn the warning tone off, touch DT.WARNING again. Setting the rear view camera (back up camera) CAUTION Pioneer recommends the use of a camera which outputs mirror-reversed images. Otherwise, the screen image will appear reversed. This unit features a function that automatically switches to the rear view camera video (REAR VIEW CAMERA IN) when a rear view camera is installed on your car and the gear shift is moved to the REVERSE (R) position. (For more details, consult your dealer.) ! After you set up the rear view camera set- ting, move the gear shift to REVERSE (R) and confirm that the rear view camera video is shown on the display. ! Change this setting if the display switches to the rear view camera video by error while you are driving forward. ! To stop watching the rear view camera video and return to the source display, press and hold MUTE/ . ! Touch the RearView source icon to display the rear view camera image while driving. Touch the source icon again to turn the rear view camera off. For details, refer to Selecting a source using the touch panel keys on page 14. 1 Display the system menu. Refer to Introduction of menu operations on page 52. 2 Touch Camera Polarity on the system menu to select the appropriate setting. ! Battery - When the polarity of the connected lead is positive while the gear shift is in REVERSE (R) position ! Ground - When the polarity of the connected lead is negative while the gear shift is in REVERSE (R) position ! Off - When a rear view camera is not connected to this unit Setting the video signal When you connect this unit to an AV equipment to this unit, select the suitable video signal setting. ! As this function is initially set to Auto, the unit will automatically adjust the video signal setting. En 63