Pioneer AVIC N2 Other Manual - Page 20

Installation Installing the display unit and Hide-away unit Installation notes • Do not install the display unit or Hide-away unit in places where it may become subject to high temperatures or humidity, such as: * Places close to a heater, vent or air conditioner. * Places exposed to direct sunlight, such as on top of the dashboard or the rear shelf. * Places that may be splashed by rain, for example close to the door. • When installing the unit choose a position that is strong enough to bear the weight of the unit. Choose positions where the display unit or Hide-away unit can be firmly installed, and install it securely. Unless the display unit or Hide-away unit are securely attached, the current location of the vehicle cannot be displayed correctly. • Do not install the Hide-away unit on the board covering the spare tire or other places which are subject to vibration. • When the Hide-away unit is installed under a front seat, ensure that it does not obstruct the sliding action of the seat. • When installing the Hide-away unit, choose a position that ensures there will be no contact with luggage. The impact of a heavy weight or sudden shock on the Hide-away unit will adversely affect the accurate display of the current location of the vehicle. • Avoid installing the Hide-away unit in places where it will interfere with loading and unloading of the spare tire, jack, tools, etc. • Check that a disc can be ejected with the display unit installed. • Install the Hide-away unit horizontally on a surface within +30 degrees to -30 degrees tolerance (within five degrees to the left or right of your vehicle's direction of travel). Mis-installing the unit with the surface tilted more than these tolerances would increase the potential for errors in the location display, and might otherwise cause reduced display performance. 5° 30° 30° • If installation angle exceeds 30º from horizontal, the display unit might not give its optimum performance. 30° 19