Pioneer AVIC N2 Other Manual - Page 9

English 30-pin cable (supplied) 3 m (9 ft. 10 in.) Note: When Pioneer multi-channel processor (sold separately) is connected to this unit, make sure the "5.1 CH" mode is activated. Please find the correct setting by referring to "Switching the 5.1ch setting" in the "Operation Manual" of the navigation system. WIRED REMOTE Please see the Instruction Manual for the Wired Remote Control (sold separately). Display unit MIC INPUT The microphone in the voice recognition kit (e.g. CD-VC1) (sold separately) is connected when the voice recognition function is used. Español Deutsch Français Italiano Black Yellow Power cord DIGITAL OUT This is used when connecting to the Pioneer multi-channel processor (sold separately), that is compatible with this unit. Otherwise this is not used. IP-BUS cable (supplied with TV tuner) Hide-away XM tuner (GEX-P10XMT) (sold separately) Black Black Blue *1 Note: The XM tuner will not receive XM Radio service when you drive outside of the XM's coverage area. When the XM tuner is not used, connect the IP-BUS cable*1 directly to the navigation's Hide-away unit*2. G.SP (Guidance speaker output) This is not used normally. When combining this unit with Pioneer multi-channel processor (sold separately) that is compatible with this unit, G.SP will be used to output the guidance voice. In this case, the Pioneer external speaker (e.g. CD-TS37GP) (sold separately) must be connected to the SP-OUT jack (2.5 ø MINI JACK, 1W max [16 Ω]). For details, see the operation manual of the external speaker. XM DATA cable (supplied with XM tuner) • When combining this unit with GEX-P10XMT (sold separately), this connection must be required. • When installing the XM tuner in the trunk, etc., the extension cable (e.g. CD-600DC) (sold separately) is required. 8 Nederlands