Pioneer DV-47A Owner's Manual - Page 16
Getting Started
View all Pioneer DV-47A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4 Getting Started Setting the TV System (except for Taiwanese model) The default setting of this player is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you experience picture distortion with some discs, set the TV system to match your country or region's system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC). Disc Type Format DVD NTSC PAL Video CD NTSC PAL Super VCD NTSC PAL SACD CD, No disc Output format Position of TV SYSTEM switch NTSC PAL AUTO NTSC MOD. PAL PAL NTSC PAL NTSC MOD. PAL NTSC NTSC NTSC PAL MOD. PAL PAL NTSC NTSC NTSC PAL PAL PAL NTSC or PAL PAL NTSC or PAL STANDBY/ON ¡¢ About MOD. (Modulation) PAL • SHRINK Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage. • If your PAL TV does not have a V-Hold control, you may not be able to view NTSC disc because the picture may roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen. This is not a malfunction; it is caused by the NTSC]PAL conversion. STANDBY/ON DIGITAL DATA OFF LEGATO PRO FL OFF 0 41 ¡¢ 7 8 3 Î Note This front panel is for the DV-S733A. The buttons are the same for the DV-47A. 1 Switch the player into standby. 2 Hold down ¡ ¢ then press STANDBY/ ON to switch the TV system. The TV system changes as follows: AUTO ] NTSC NTSC ] PAL PAL ] AUTO The display indicates the new setting. Note that you have to switch the player into standby before each change. 16 En