Pioneer DV-47A Owner's Manual - Page 7

What's in the box, Putting the batteries in the, remote control

Page 7 highlights

Before You Start *1 Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 19921997 Dolby Laboratories. All rights reserved. *2 "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. *3 TruSurround and the ® symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc. What's in the box Thank you for buying this Pioneer product. Please confirm that the following accessories are in the box when you open it. • Remote control • AA/R6P dry cell batteries x2 • Stereo audio cable (red/white) • Video cable (yellow) • Power cable • These operating instructions Putting the batteries in the remote control 1 Open the battery compartment cover on the back of the remote control. 2 Insert two AA/R6P batteries into the battery compartment following the indications (ª, ·) inside the compartment. 3 Close the cover. 1 Note Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: • Don't mix new and old batteries together. • Don't use different kinds of battery to- gether-although they may look similar, different batteries may have different voltages. • Make sure that the plus and minus ends of each battery match the indications in the battery compartment. • Remove batteries from equipment that isn't going to be used for a month or more. When disposing of used batteries, please comply with governmental regulations or environmental public instruction's rules that apply in your country or area. H048 En Using the remote control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote and the remote sensor on the unit. • Use within the operating range and angle, as shown. 30 30 7m (23 feet) • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit's remote sensor. • Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit. • Replace the batteries when you notice a fall off in the operating range of the remote. 7 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

7
En
1
Before You Start
*
1
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992-
1997 Dolby Laboratories. All rights reserved.
*
2
“DTS” and “DTS Digital Surround” are
registered trademarks of Digital Theater
Systems, Inc.
*
3
TruSurround and the
®
symbol are
trademarks of SRS Labs, Inc. TruSurround
technology is incorporated under license
from SRS Labs, Inc.
What’s in the box
Thank you for buying this Pioneer prod-
uct. Please confirm that the following
accessories are in the box when you open
it.
Remote control
AA/R6P dry cell batteries x2
Stereo audio cable (red/white)
Video cable (yellow)
Power cable
These operating instructions
Putting the batteries in the
remote control
1
Open the battery
compartment cover on
the back of the remote
control.
2
Insert two AA/R6P
batteries into the bat-
tery compartment
following the indications
(
ª
,
·
) inside the
compartment.
3
Close the cover.
Note
Incorrect use of batteries can result in hazards
such as leakage and bursting. Please observe the
following:
Don’t mix new and old batteries together.
Don’t use different kinds of battery to-
gether—although they may look similar,
different batteries may have different
voltages.
Make sure that the plus and minus ends of
each battery match the indications in the
battery compartment.
Remove batteries from equipment that isn’t
going to be used for a month or more.
When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules that
apply in your country or area.
H048 En
Using the remote control
Keep in mind the following when using the
remote control:
Make sure that there are no obstacles
between the remote and the remote sensor
on the unit.
Use within the operating range and angle, as
shown.
Remote operation may become unreliable if
strong sunlight or fluorescent light is shining
on the unit’s remote sensor.
Remote controllers for different devices can
interfere with each other. Avoid using remotes
for other equipment located close to this
unit.
Replace the batteries when you notice a fall
off in the operating range of the remote.
30
30
7m (23 feet)