Pioneer EFX 500 Owner's Manual - Page 16

OPERATIONS DIGITAL JOG BREAK Since the Digital Jog Break can continuously change the parameters of each effect generated by rotating the Jog dial, the effects can be controlled like a musical instrument. Effects generated with the Jog dial can be continuously stored in memory and can be reproduced any number of times at the press of the PLAY button. OVER INPUT LEVEL ISOLATOR MIN MAX EFFECT TIME mSec ON LOCK OFF ON -∞ BPM COUNTER AUTO TAP MIDI BPM LOW +6dB DELAY ECHO PAN FLANGER EFFECT FREQUENCY BEAT EFFECTS LOW MID HI ON LOCK OFF ON 1/1 3/4 2/1 TRANS DEPTH MIN MAX 1/4 1/2 4/1 BPM MODE TIME/ BPM TAP / SHIFT MID HI OVER EFFECT OUT LEV -∞ +6dB 100 80 0 10 -∞ +6dB DIGITAL JOG BREAK METER 60 40 20 0 20 40 60 20 30 40 50 60 70 80 MIN 80 100 90 100 MAX JET ZIP WAH JOG MEMORY M DEPTH PLAY MIN MAX RING FUZZ HOLD DIGITAL JOG BREAK LOCK ON OFF ON DIGITAL JOG BREAK METER 1 HOLD 2 MONITOR MIN MAX BEAT EFFECTS MIX ORIGINAL EFFECT DIGITAL JOG BREAK DEPTH 1 Select the type of effect to be produced by pressing a Jog Effect Select button. JET ZIP WAH RING FUZZ 2 Set the DIGITAL JOG BREAK Lever switch to ON and turn the Jog dial. DIGITAL JOG BREAK Lever switch operation Rear position (LOCK-ON): the effect is on and locked and remains in effect also when the switch is released. Turn off the function by returning the switch to the center (OFF) position. Front position (ON): the effect is on as long as the switch is held at this position and returns to the center (OFF) position when released. Use this position for flicking between the ON and OFF positions. DIGITAL JOG BREAK LOCK ON OFF ON DIGITAL JOG BREAK DIGITAL JOG BREAK LOCK ON OFF ON DEPTH Dial A standard effect is produced at the center clicked position. The parameter changes produced by turning the DEPTH dial are described on page 7. 16 En DEPTH MIN MAX ¶ The selected jog effect button flashes. ¶ See page 7 for a description of each effect. ¶ When the Lever switch is set to OFF, the original sound is unaffected. ¶ Parameter changes caused by rotating the Jog dial are indicated on the DIGITAL JOG BREAK METER. HOLD Function When the HOLD button is pressed and lit, the effect generated by the rotation of the Jog dial continues when the dial rotation stops. HOLD