Pioneer EFX 500 Owner's Manual - Page 17

OPERATIONS JOG MEMORY The memory can store up to 8 seconds of effects generated by the Jog dial of the Digital Jog Break function. OVER INPUT LEVEL ISOLATOR MIN MAX EFFECT TIME mSec ON LOCK OFF ON -∞ BPM COUNTER AUTO TAP MIDI BPM LOW +6dB MID HI OVER EFFECT OUT LEV -∞ +6dB 100 80 0 10 -∞ +6dB DIGITAL JOG BREAK METER 60 40 20 0 20 40 60 20 30 40 50 60 70 80 MIN 80 100 90 100 MAX DELAY ECHO PAN FLANGER EFFECT FREQUENCY BEAT EFFECTS LOW MID HI ON LOCK OFF ON 1/1 3/4 2/1 TRANS DEPTH MIN MAX 1/4 1/2 4/1 BPM MODE TIME/ BPM TAP / SHIFT JET ZIP WAH JOG MEMORY M DEPTH PLAY MIN MAX RING FUZZ HOLD DIGITAL JOG BREAK LOCK ON OFF ON 1 4 2 3 MONITOR MIN MAX BEAT EFFECTS MIX ORIGINAL EFFECT DIGITAL JOG BREAK 1 Press a Jog Effect Select button to select the type of effect. JET ZIP WAH RING FUZZ 2 Set the DIGITAL JOG BREAK Lever switch to ON to monitor the effect. DIGITAL JOG BREAK LOCK ON OFF ON 3 Turn the Jog dial while holding down JOG MEMORY M PLAY the JOG MEMORY button (M). Turning the Jog dial while the M button is held down starts memory storage. Effects are stored continues for 8 seconds or until the M button is released. The PLAY button lights. 4 Press the JOG MEMORY PLAY Button. The stored effect is played back once for as long as the button is pressed. DIGITAL JOG BREAK PLAY ¶ The selected effect button flashes. ¶ See page 7 for a description of each effect. ¶ When the Headphone Monitor Select switch is set to JOG, it can monitor the effects even if the Lever switch is set to OFF. ¶ When an effect has been stored (and the PLAY button is lit), the storing of a new effect will overwrite the old effect (delete it). ¶ The effects stored in memory can be repeatedly reproduced by repeatedly pressing the PLAY button. ¶ Jog dial operation stored in memory can be reproduced even when the type of effect is subsequently changed. 17 En