Pioneer P7600DVD Owner's Manual - Page 71

DVD Player Section 14 DVD Player Turning the DVD player on or off ! Only the remote control can operate this function. To perform this function, switch the remote control operation mode to DVD. (Refer to page 18.) % Press REAR.S to turn the DVD player on. # To turn the DVD player off, press REAR.S again. Introduction of advanced DVD player operation 1 Selecting a disc ! You can operate this function only when a multi-DVD player is connected to this unit. % Touch any of 16 to select the desired disc. # When 16 are not displayed, you can display them by touching DISP. # You can also sequentially select a disc by using a/b. # You can also skip back or forward to another disc by moving the joystick up or down. When using the joystick on the remote control, switch the remote control operation mode to AVH. (Refer to page 18.) # You can also select a disc by pressing BACK or ENTERTAINMENT on the remote control when the remote control operation mode is switched to DVD. 1 Function display Shows the function names. % Touch A.MENU and then touch FUNCTION to display the function names. The function names are displayed and operable ones are highlighted. # When A.MENU is not displayed, you can display it by touching the screen. # You can also display MENU by clicking the joystick. # To return to the previous display, touch BACK. # To return to the playback display, touch ESC. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. Repeating play ! During PBC playback of Video CDs, this function cannot be operated. 1 Touch A.MENU and FUNCTION and then touch REPEAT. En 71