Pioneer P7600DVD Owner's Manual - Page 93
Setting the clock, Setting the automatic open, function, Other Functions
UPC - 012562745602
View all Pioneer P7600DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Other Functions Section 18 Other Functions 1 Touch A.MENU and SETUP and then touch BACK UP CAMERA. 2 Touch a to turn rear view camera setting on. # To turn rear view camera setting off, touch b. 3 Touch c or d to select an appropriate setting for polarity. Each time you touch c or d it switches between the following polarity: ! BATTERY When the polarity of the connected lead is positive while the gear shift is in REVERSE (R) position ! GND When the polarity of the connected lead is negative while the gear shift is in REVERSE (R) position Setting the clock Use these instructions to set the clock. ! When this unit is turned on, time is dis- played on the entertainment clock only. (Refer to Switching the background display on page 95.) 1 Touch A.MENU and SETUP and then touch CLOCK ADJUST. 2 Touch c or d to select the segment of the clock display you wish to set. Each time you touch c or d it will select one segment of the clock display: HourMinute As you select segments of the clock display the segment selected will be highlighted. 3 Touch a or b to set the clock. Each time you touch a it increases the selected hour or minute. Each time you touch b it decreases the selected hour or minute. Notes ! You can match the clock to a time signal by touching JUST. If the minute is 0029, the minutes are rounded down. (e.g., 10:18 becomes 10:00.) If the minute is 3059, the minutes are rounded up. (e.g., 10:36 becomes 11:00.) ! You can display the clock for eight seconds by pressing FLIP DOWN/CLOCK when the LCD panel is closed. ! Even when the sources are off, the clock display appears on the display. Setting the automatic open function To prevent the display from hitting the shift lever of an automatic vehicle when it is in P (park) position, or when you do not wish the display to open/close automatically, you can set the automatic open function in the manual mode. 1 Touch A.MENU and SETUP and then touch AUTO FLAP. En 93