Pioneer PDP-R04U Owner's Manual - Page 54
Energy Save, No Signal off
UPC - 073168074213
View all Pioneer PDP-R04U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
09 Basic Adjustment Settings Power Control Power Control provides convenient functions for power saving. Power Control for AV source Energy Save Power consumption is saved by decreasing picture brightness. 1 Press HOME MENU. 2 Press / to select "Power Control", and then press ENTER. 3 Press / ENTER. 4 Press / ENTER. to select "Energy Save", and then press to select "Save", and then press No Signal off The system will be automatically placed into the standby mode if no signal is received for 15 minutes. 1 Press HOME MENU. 2 Press / to select "Power Control", and then press ENTER. 3 Press / to select "No Signal off", and then press ENTER. 4 Press / to select "Enable", and then press ENTER. Item Description Standard Does not decrease picture brightness. (factory default) Save Decreases picture brightness to save power. 5 Press HOME MENU to exit the menu. • You can also select this function using the Home menu when the input source is a PC. Item Description Disable Does not place the system into the (factory default) standby mode. Enable Places the system into the standby mode if no signal is received for 15 minutes. 5 Press HOME MENU to exit the menu. • Five minutes before the system is placed into the standby mode, a message appears every minute. • The system may not be placed into the standby mode when noise signals are present at the Media Receiver after a TV program finishes. 54 En PDP5040HD-Eng (40-55) 54 7/24/03, 1:59 PM