Pioneer PDP-R04U Owner's Manual - Page 76
To delete information about all devices, In standby mode
UPC - 073168074213
View all Pioneer PDP-R04U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
11 Enjoying through External Equipment To delete information about all devices: 1 Press / to select "Delete All", and then press ENTER. 2 Press / to select "Delete" and then press ENTER. Setting up for i.LINK standby Use the following procedure to enable data transfer between multiple i.LINK devices even when the system is in the standby mode. 1 Press HOME MENU. 2 Press / to select "DTV Setup", and then press ENTER. 3 Press / to select "i.LINK Setup", and then press ENTER. 4 Press / to select "i.LINK Standby", and then press ENTER. 5 Press / to select "Enable", and then press ENTER. • A confirmation message appears. • A warning message appears if the selected device has been preset for recording with the timer or if its power is on. If you delete a device that has been preset for recording, its all presettings are deleted. 3 Press / to select "OK", and then press ENTER. 6 Press HOME MENU to exit the menu. • With "Enable" selected, the system relays data between multiple i.LINK devices even when in the standby mode; the i.LINK circuits are energized in that mode. • With "Disable" (factory default) selected, less power is consumed when the system is in the standby mode; however the system does not relay data between multiple i.LINK devices. When i.LINK devices are not in connection, select "Disable", resulting in less power consumption. In standby mode i.LINK device Media Receiver i.LINK device No data relay 76 En PDP5040HD-Eng (65-80) 76 7/24/03, 2:00 PM