Pioneer PDP-R04U Owner's Manual - Page 61
Enter, Dtv Guide, Power
UPC - 073168074213
View all Pioneer PDP-R04U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Electronic Program Guide (EPG) (for DTV Only) 10 English Recording TV programs via a VCR controller If you connect an appropriate VCR controller to the Media Receiver, you can preset digital TV programs for recording with a connected VCR. See page 78. 1 Press DTV GUIDE. • The EPG screen appears. 2 Press / and / to select a program to be preset, and then press ENTER. • A setup menu appears. 4 Press / to select "ANALOG", and then press ENTER. • A dialog box for confirmation appears. 3 Press / to select "Program Rec", and then press ENTER. • A dialog box for mode selection appears. 5 Press / to select "OK", and then press ENTER. • The program is preset and the schedule table is restored. • A red square icon appears for the preset program. • A black icon appears for overlapped presetttings. 6 Press DTV GUIDE to exit the Program Guide. • Switch on the recording equipment at least 30 seconds before the start of the preset program; otherwise recording will not be executed. • Finish presetting operations two minutes before the start of the program; otherwise presettings may fail. • For priorities about overlapped presettings, see "Priority rules for overlapped presettings" on page 63. • Confirm that the video output terminals on the Media Receiver have been connected to the signal input terminals on the VCR to be used for recording. • If you switch off the system using the POWER button, the program presetting will become ineffective. Be careful not to switch off the power. PDP5040HD-Eng (56-64) 61 61 En 7/24/03, 2:00 PM