Pioneer PDP-R04U Owner's Manual - Page 98
Mode switch, EDIT/LEARN
UPC - 073168074213
View all Pioneer PDP-R04U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
13 Useful Features Using the learning function 1 Slide the Mode switch to match the device whose remote control signal you want to be learned. 2 Press EDIT/LEARN and 2 at the same time. •The LED flashes. 3 Press a button to be learned. • The LED lights up. • For the functions that can be learned, see pages 100 to 105. • When learning is finished, the LED starts flashing again. 4 Press EDIT/LEARN again to exit the Learn mode. • To exit the Learn mode halfway, press EDIT/LEARN again. • If the Mode switch selection is changed when in the Learn mode, the Learn mode is cancelled. • If no operation is performed for more than one minute, the Learn mode is cancelled. • It takes about 2 seconds to finish code transmission. Do not interrupt it halfway. Wait until the LED flashes again. • You can reset all learned codes to the factory defaults. When not in the Learn mode, press and hold TVa, and then press D and k at the same time. 98 En PDP5040HD-Eng (97-105) 98 7/24/03, 2:01 PM