Pioneer PRS D1000M Owner's Manual - Page 12
Four Amplifier Ex. Bridge
UPC - 012562821375
View all Pioneer PRS D1000M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting the Unit Four Amplifier (Ex. Bridge) MODE SELECT switch must be in MASTER position. Connect to a car stereo. For details, see the SYNC OUTPUT "Connection Diagram". Connecting speaker wire (sold separately). MODE SELECT switch must be in SYNC INV position. Connecting wire with RCA pin plugs (sold separately). SYNC OUTPUT 2 Ω to 16 Ω SYNC INPUT MODE SELECT switch must be in SYNC INV position. SYNC OUTPUT Connecting wire with RCA pin plugs (sold separately). SYNC INPUT Connecting speaker wire (sold separately). MODE SELECT switch must be in SYNC INV position. Connecting wire with RCA pin plugs (sold separately). SYNC INPUT • Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple speakers with a bridge, check that the synthetic impedance is at least 2 Ω. • The setting of the POWER MODE switch varies according to the speaker impedance. Slide the POWER MODE switch to the HI-CURRENT position if the impedance is from 2 Ω to less than 4 Ω, or slide it to the NORMAL position if the impedance is from 4 Ω to 16 Ω. The same setting is used for four amplifiers. • When switching to the SYNC INV mode, the seal over the MODE SELECT switch must be peeled off and you can find SYNC INV switch. Peel off the seal after checking that connections are correct. 11