Pioneer PRS D1000M Owner's Manual - Page 16

Specifications Power source ...14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ...Negative type Current consumption ...39 A (at continuous power, 4 Ω) Average current drawn* ...12 A (4 Ω for one channel) 20 A (2 Ω for one channel) 28 A (1 Ω for one channel) Fuse (external) ...40 A × 2 Dimensions ...304 (W) × 56 (H) × 202 (D) mm [12 (W) × 2-1/4 (H) × 8 (D) in.] Weight ...3.0 kg (6.6 lbs.) (Leads for wiring not included) Maximum power output 800 W × 1 (4 Ω) / 1 200 W × 1 (1 Ω to 2 Ω) Continuous power (14.4 V NORMAL mode: 4 Ω, 20 Hz to 240 Hz, 1.0% THD, 400 W × 1 2 Ω, 100 Hz, 1.0% THD, 600 W × 1 HI-CURRENT mode: 4 Ω, 20 Hz to 240 Hz, 1.0% THD, 150 W × 1 2 Ω, 100 Hz, 1.0% THD, 300 W × 1 1 Ω, 100 Hz, 1.0% THD, 600 W × 1 Load impedance ...4 Ω (1 Ω to 8 Ω allowable) Frequency response ...10 Hz to 240 Hz (+0 dB, -3 dB) S/N ratio ...92 dB (IHF-A network) Distortion ...0.5 % (10 W, 100 Hz) Low pass filter ...Cut off frequency: 40 Hz to 240 Hz Cut off slope: -18 dB/oct Subsonic filter (HPF) ...Frequency: 20 Hz Slope: -18 dB Bass boost ...Frequency: 50 Hz Level: 0 / 6 / 9 / 12 dB Gain control ...RCA: 400 mV to 6.5 V SP: 1.6 V to 26 V Maximum input level / impedance ...RCA: 6.5 V / 22 kΩ SP: 26 V / 90 kΩ Power output NORMAL mode: 400 W RMS × 1 channel (at 4 Ω and 1% THD+N) 600 W RMS × 1 channel (at 100 Hz , 2 Ω and 1% THD+N) HI-CURRENT mode: 150 W RMS × 1 channel (at 4 Ω and 1% THD+N) 300 W RMS × 1 channel (at 100 Hz , 2 Ω and 1% THD+N) 600 W RMS × 1 channel (at 100 Hz , 1 Ω and 1% THD+N) S/N ratio 66 dBA (reference: 1 W into 4 Ω) Note: • Specifications and the design are subject to possible modification without notice due to improvements. *Average current drawn • The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. 15