Pioneer SC-91 Owner's Manual - Page 49

04 Basic Setup 4 Select the input function that you want to set up. The default names correspond with the names next to the terminals on the rear panel (such as DVD or SAT/CBL which, in turn, correspond with the names on the remote control. 5 Select the input(s) to which you've connected your component. For example, if your DVD player only has an optical output, you will need to change the DVD input function's Audio In setting from COAXIAL (default) to the optical input you've connected it to. 6 When you're finished, proceed to the settings for other inputs. There are optional settings in addition to the assignment of the input jacks: ! Input Name - You can choose to rename the input function for easier identification. Select Rename to do so, or Default to return to the system default. ! Input Skip - When set to ON, that input is skipped when selecting the input using ALL. (DVD and other inputs can be still be selected directly with the input function buttons.) ! 12V Trigger 1/2 - After connecting a component to one of the 12 volt triggers (see Switching components on and off using the 12 volt trigger on page 37 ), select MAIN, ZONE 2, HDZONE or OFF for the corresponding trigger setting to switch it on automatically along with the (main or sub) zone specified. 7 When you're finished, press RETURN. You will return to the System Setup menu. Input function default and possible settings The terminals on the receiver generally correspond to the name of one of the input functions. If you have connected components to this receiver differently from (or in addition to) the defaults below, see The Input Setup menu on page 48 to tell the receiver how you've connected up. The dots (k) indicate possible assignments. Input function BD DVD SAT/CBL DVR/BDR HDMI 1 HDMI (BD) IN 1 IN 2 IN 3 k Input Terminals Audio k COAXIAL k Component k IN k HDMI 2 k HDMI 3 k HDMI 4 IN 4 HDMI 5 (front panel) IN 5 HDMI 6/MHL IN 6 INTERNET RADIO PANDORA Spotify MEDIA SERVER FAVORITES iPod/USB Input function TV CD TUNER BT AUDIO HDMI Input Terminals Audio OPTICAL ANALOG-1 Component a When ARC at HDMI Setup is set to ON, it is not possible to make assignments to the TV input's Audio In terminals. b Only the TV and CD inputs can be assigned to ANALOG-1. Changing the OSD display language (OSD Language) The language used on the Graphical User Interface screen can be changed. ! The explanations in these operating instructions are for when English is selected for the GUI screen. ! With factory default settings, the on-screen display will be output from all HDMI output terminals and displayed on any TV connected via HDMI cable. You can change where the screen is output in the MAIN/HDZONE (page 98 ) and HDMI output (page 76 ) settings. 1 Press u STANDBY/ON to switch on the receiver and your TV. Make sure that the TV's video input is set to this receiver (for example, if you connected this receiver to the VIDEO jacks on your TV, make sure that the VIDEO input is now selected). 2 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the screens and select menu items. Press RETURN to exit the current menu. 3 Select 'System Setup' from the Home Menu. 4 Select 'OSD Language' from the System Setup menu. 5 Select the desired language. 6 Select 'OK' to change the language. The setting is completed and the System Setup menu reappears automatically. Changing the frequency step If you find that you can't tune into stations successfully, the frequency step may not be suitable for your country/ region. Here's how to switch the setting: 1 Switch the receiver into standby. 2 While holding down ENTER on the front panel, press u STANDBY/ON. The display shows RESET c NO d. 3 Use TUNE i/j to select FREQ STEP c 9k d, and then use PRESET k/l to select 9k or 10k. 49