Pioneer SC-LX85 Operating Instructions - Page 15
A] 9.2 channel surround system Front, height/Front wide connection, B] 7.2 channel surround system &
View all Pioneer SC-LX85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting your equipment 03 Connecting the RF adapter SC-LX85 only Two-way communications between the receiver and remote control are possible by connecting the included RF adapter to the RS-232C and CU-RF100 terminals on the receiver. For the features of two-way communications and detailed usage instructions, see Using the RF communications function on page 70. (DVR/ BDR) IN 3 (VIDEO) MONITOR OUT ZONE2 OUT RS-232C ZONE 2 ZONE 3 DVD TV/SAT VIDEO OUT OUT IN IN IN A R AM LOOP ANTENNA FM UNBAL 75 IR IN 1 IN 1 SPEAKERS CU-RF100 OUT IN 2 OUT 2 (OUTPUT 5 V 150 mA MAX) (OUTPUT 12 V TOTAL 150 mA MAX) CONTROL 12VTRIGGER RF adapter Determining the speakers' application This unit is equipped with speaker terminals for 9 channels, allowing users to select a variety of speaker layouts/usage patterns according to their tastes. The terminals to which the speakers should be connected differ according to the speaker layout/usage pattern. Select one speaker layout/usage pattern before connecting the speakers. For instructions on connections, see Installing your speaker system on page 19. ! Be sure to connect speakers to the front left and right channels (L and R). ! It is also possible to only connect one of the surround back speakers (SB) or neither. ! If you have two subwoofers, the second subwoofer can be connected to the SUBWOOFER 2 terminal. Connecting two subwoofers increases the bass sound to achieve more powerful sound reproduction. In this case, the same sound is output from the two subwoofers. Important ! The Speaker System setting must be made if you use any of the connections shown below other than [A] (see Speaker system setting on page 87). ! The speakers from which sound is output can be switched according to the speaker layout/usage pattern (sound is not necessarily output from all connected speakers). Use the SPEAKERS button to switch the speakers from which sound is output. For details, see Switching the speaker terminals on page 61. [A] 9.2 channel surround system (Front height/Front wide) connection *Default setting ! Speaker System setting: 9.1ch FH/FW FHL L SW 2 FWL FHR R FWR SW 1 C SR SBR SL SBL A 9.2 ch surround system connects the left and right front speakers (L/R), the center speaker (C), the left and right front height speakers (FHL/FHR), the left and right front wide speakers (FWL/FWR), the left and right surround speakers (SL/SR), the left and right surround back speakers (SBL/SBR), and the subwoofers (SW 1/SW 2). It is not possible to produce sound simultaneously from the front height speakers and the front wide speakers. This surround system produces a more true-tolife sound from above. The speakers from which sound is output can be switched using the SPEAKERS button. For details, see Switching the speaker terminals on page 61. [B] 7.2 channel surround system & Speaker B connection ! Speaker System setting: 7.1ch + Speaker B FHL FHR R L SW 2 SW 1 C SL SBL R SR L SBR Speaker B With these connections you can simultaneously enjoy 7.2-channel surround sound in the main zone with stereo playback of the same sound on the B speakers. The same connections also allow for 9.2-channel surround sound in the main zone when not using the B speakers. The speakers from which sound is output can be switched using the SPEAKERS button. For details, see Switching the speaker terminals on page 61. En 15