Pioneer VSX-1016TXV Owner's Manual - Page 61

Additional information 12 HDMI Symptom No picture or sound. No picture. OSD does not appear. No sound, or sound suddenly ceases. Remedy • If the problem still persists when connecting your HDMI component directly to your monitor, please consult the component or monitor manual or contact the manufacturer for support. • Depending in the output settings of the source component, it may be outputting a video format that can't be displayed. Change the output settings of the source, or connect using the component, S-video or composite jacks. • The OSD will not appear if you have connected using the HDMI output to your TV. Use component, Svideo, or composite connections when setting up the system. • Since the HDMI audio signal is sent through this receiver to your TV, you need to make separate connections for audio if you want to hear your HDMI component through this system. See Connecting using HDMI on page 41 for more on this. • If you've made separate connections for audio, make sure you have assigned the analog/digital jack(s) to the corresponding HDMI input for the component. See Assigning the HDMI inputs on page 47 to do this. • Check the audio output settings of the source component. XM radio messages Symptom Check Antenna XM ANT ERR Updating No Signal Loading Off Air CH Cause Action The XM antenna is not connected. Check that the XM antenna cable is attached securely. A short-circuit occurring in the antenna or surrounding antenna cable. Make sure that there is nothing unusual with the antenna or antenna cable. Switch the power off then back on again. The radio is being updated with the latest encryption code. Wait until the encryption code has been updated. Channels 00 and 01 should function normally. The XM signal is too weak at the current location. n/a The receiver is acquiring audio or program information. Wait until the information has been received. The channel currently selected has stopped broadcasting. Select another channel. You have selected a channel that does not exist, The receiver will automatically switch to channel 001 (or the or that you have not subscribed to. last selected channel). There is no artist name/feature, song/program title, or channel category associated with the channel at this time. No action needed. Note • If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. 61 En