Pioneer VSX-815-S Owner's Manual - Page 15
Connecting up - receiver
View all Pioneer VSX-815-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English Deutsch Français Italiano Nederlands Español Connecting up 04 Chapter 4: Connecting up Making cable connections Make sure not to bend the cables over the top of this unit (as shown in the illustration). If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers. Digital audio cables Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver. Important • Before making or changing any connections, switch off the power and disconnect the power cord from the AC outlet. Analog audio cables Use stereo RCA phono cables to connect analog audio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals. Analog audio cables Right (red) Left (white) Coaxial digital audio cable Optical cable • When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket. • When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners. • You can also use a standard RCA video cable for coaxial digital connections. Video cables Standard RCA video cables These cables are the most common type of video connection and should be used to connect to the composite video terminals. They have yellow plugs to distinguish them from cables for audio. Standard RCA video cable 15 En