Pioneer VSX-815-S Owner's Manual - Page 58
Controlling the rest of your system, Confirming preset codes
View all Pioneer VSX-815-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
10 Controlling the rest of your system When direct function is on, any component you select (using the MULTI CONTROL buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without affecting the receiver.1 1 While pressing the RECEIVER button, press and hold the 1 button. The remote LCD display shows SETUP. 2 Press the MULTI CONTROL button for the component you want to control. The LCD on the remote displays the component you want to control. 3 Use / (cursor left/right) to select DIRECT F then press ENTER. The LCD on the remote displays the component you want to control. 4 Use / (cursor up/down) to switch direct function ON or OFF then press ENTER. The LCD shows OK to confirm the setting. Confirming preset codes Use this feature to check which preset code is assigned to a MULTI CONTROL button. 1 While pressing the RECEIVER button, press and hold the 1 button. The remote LCD display shows SETUP. 2 Press the MULTI CONTROL button of the component for which you want to check the preset code. 3 Use / (cursor left/right) to select READ ID then press ENTER. The brand name and preset code appears in the display for three seconds. Note 1 You can't use direct function with the TV CONT function. 58 En