Pioneer VSX-815-S Owner's Manual - Page 38
Listening to your system, Choosing the input signal
View all Pioneer VSX-815-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
06 Listening to your system Choosing the input signal You need to hook up a component to both analog and digital inputs on the rear of the receiver to select between input signals.1 ADVANCED ST/DIRECT SIGNAL STANDARD SURR /AUTO SURR SELECT LISTENING MODE 1 Press SIGNAL SELECT on the front panel to select the input signal corresponding to the source component. Press repeatedly to select between: • AUTO - This automatically switches to DIGITAL if a digital source is detected, otherwise it remains on ANALOG. • ANALOG - Selects the analog inputs. • DIGITAL - Selects the digital input. When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input. Note 1 • This receiver can only play back Dolby Digital, PCM (32kHz-96 kHz), WMA9 Pro and DTS digital signal formats. With other digital signal formats, set to ANALOG. • You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 15) and set the signal input to DIGITAL. • Some DVD players don't output DTS signals. For more details, refer to the instruction manual supplied with your DVD player. 38 En