Pioneer VSX-815-S Owner's Manual - Page 25
Connecting up, AC outlet
View all Pioneer VSX-815-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connecting up 04 English Deutsch Français Italiano Nederlands Español • Make sure no exposed speaker wire is touching the rear panel, this may cause the receiver to turn off automatically. 3-D view of 7.1 channel speaker setup Overhead view of speaker setup You can also refer to the 3-D speaker setup illustration on page 10. Front left Center Front right Surround left Subwoofer Surround right Listening position Surround back left Surround back right Single surround back speaker . The diagrams below show suggested surround and surround back speaker orientation. The first diagram (fig. A) shows orientation with one surround back speaker (or none) connected. The second (fig. B) shows orientation with two surround back speakers connected. 90~120 LS RS LS RS LS SB fig. A 0~60 RS SBL SBL SBR SBR fig. B AC outlet Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A). • This unit should be disconnected by removing the power plug from the wall socket when not in regular use (ex. when on vacation). AC OUTLET Caution • Do not connect a TV set, monitor, heater, or similar appliance to this unit's AC outlet. • Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction. • Since a subwoofer or power amplifier can exceed the 100W maximum when playing sources at a high volume, this type of equipment should not be connected to the AC outlet. 25 En