Pioneer VSX-815-S Owner's Manual - Page 69
Additional information - troubleshooting
View all Pioneer VSX-815-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
English Deutsch Français Italiano Nederlands Español Additional information 13 Chapter 13: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized independent service company to carry out repair work. • If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. Problem The power does not turn on. Remedy • Connect the power plug to the wall outlet. • Disconnect the power plug from the outlet, and insert again. • Make sure there are no loose strands of speaker wire touching the rear panel. This could cause the receiver to shut off automatically. • If the power shuts off automatically, take the unit to your nearest Pioneer authorized service center or your dealer for servicing. No sound is output when a function is selected. • Make sure the component is connected correctly (refer to Connecting up on page 15). • Press MUTE on the remote control to turn muting off. • Press SPEAKERS to select the proper speaker set (see Switching the speaker system on page 62). • Press SIGNAL SELECT to select the proper input signal (see Choosing the input signal on page 38). No image is output when a function is selected. • Make sure the component is connected correctly (refer to Connecting up on page 15). • Select the correct component (use the input select buttons). • Check Assigning the component video inputs on page 66 to make sure you're assigned the correct input. • The video input selected on the TV monitor is incorrect. Refer to the instruction manual supplied with the TV. • VSX-915 only - The video converter can convert composite video to Svideo, but not vice-versa (and not component video). See About the video converter on page 16 for more on this. 69 En