Pioneer VSX-D508 Owner's Manual - Page 24

Display 11 12 13 dts SIGNAL SELECT F -ir- ' THEATER I I DIRECT I HP SP).AB _ ` MONO I I ATT 1 MIDNIGHT: fl7INT:11 1 LOUDNESS' TSTEREO TUNED ANALOG DO PRO LOGIC I DIGITAL 00 DIGITALI DTS IVO 1TO 0 1O III 0 1O 0 VAL 1411. IV. IAA - nOOndB VSX-D608 only 15 CD SIGNAL SELECT indicators Light to indicate the type of input signal selected for the current component (refer to "Front Panel", 8, SIGNAL SELECT on pages 26, 27). ANALOG : Lights when the analog audio signals are selected. DIGITAL : Lights when the digital audio signals are selected. AC-3 : Lights when a source with Dolby Digital signals is played. DTS (VSX-D608 only) : Lights when a source with DTS audio signals is played. Digital indicators dts (VSX-D608 only) : Lights when DTS signals are input. (Dolby/DTS mode is ON) IJOPRO LOGIC : When the Dolby mode on the receiver is on, this indicator lights during 2 channel playback of Dolby Digital sources. CI0DIGITAL : When the Dolby mode on the receiver is on, this indicator lights to indicate playback of a Dolby Digital signal. However, 00 PRO LOGIC lights during 2 channel playback of Dolby Digital. CD SFC (DSP) mode indicator Lights when the DSP mode or ADVANCED THEATER mode (except for 5-D THEATER) is selected. (VSXD608) Lights when the DSP mode is selected. (VSX-D508) (Refer to "Surround modes" on page 28) ATT indicator Lights when ATT (refer to "Remote Control", ©, Number buttons on page 25) is used to reduce the level of the input signal (available in ANALOG mode only). Overload indicator When "ANALOG" is selected in SIGNAL SELECT, this indicator lights to show that an excessively strong signal is being processed. When this occurs, press ATT on the remote control to attenuate the signal. Also, when "DIGITAL" is selected in SIGNAL SELECTOR, this indicator lights to show that a source containing an excessive amount of information is being processed (VSX-D608 only). When this occurs, refer to pages 31 and 32. 5-D THEATER indicator (VSX-D608 only) Lights when 5-D THEATER is selected. MIDNIGHT indicator Lights when the MIDNIGHT mode is on. 24 16 17 DNR indicator (VSX-D608 only) Lights when the DIGITAL NR is on. ® LOUDNESS indicator Lights when loudness is on (refer to "Front Panel", ®, LOUDNESS on pages 26, 27). 0 DIRECT indicator Lights when direct playback is on (refer to "Front Panel", ©, DIRECT on pages 26, 27). 0 Tuner indicators STEREO : Lights when an FM stereo broadcast is received in the auto stereo mode. TUNED : Lights when a broadcast is received. MONO : Lights when the tuner is set to receive FM broadcasts in monaural. • H.P indicator Lights when headphones are plugged in. 0 Speaker indicators Light to indicate the current speaker system (refer to "Front Panel", CD, SPEAKERS (A/B) on pages 26, 27). SP ► A : Lights when speaker system A is selected. SP ► B : Lights when speaker system B is selected. g Program format indicators The following indicators light to show the channels being played back. L Left front*1*2, C : Center*', R : Right front*1*2, LS : Left surround*1,S : Surround (mono)*2, RS : Right surround*' *1: Indicates 5.1ch Dolby Digital playback. *2: Indicates Dolby surround playback. • LFE indicator LFE (Low Frequency Effects) indicator lights to indicate that the program source contains an LFE channel. The indicator to the left of LFE lights during actual playback of the LFE signals (LFE signals are not present in all parts of the sound track). is Character display © Volume level display Displays the volume level. Volume level is maintained even when the power is off. ---dB indicates the minimum level, and 0dB indicates the maximum level. • Depending on the level settings for individual channels, the MAX level can range between -10dB and 0dB.