Pioneer VSX-D508 Owner's Manual - Page 29
Switching, ANALOG/DIGITAL, Signal, Input
View all Pioneer VSX-D508 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Switching ANALOG/DIGITAL Signal Input The input of the component set in the digital input setting (Refer to page 20, 21) can be switched to an analog or digital input signal by pressing the SIGNAL SELECT button. NOLLVU3dO ,ECL'or.P, aor nee - SIG.SELECT Press SIG. SELECT on the remote control or SIGNAL SELECT on the front panel to select the input signal corresponding to the source component. Each press switches between ANALOG and DIGITAL signal selection. SIGNAL SELECT ANALOG A SIGNAL SELECT DISTAL While SIGNAL SELECT is set to DIGITAL, AC-3 lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input SIGNAL SELECT MG.117,1. A-C3 When a Dolby Digital signal is input. SIGNAL SELECT SIGNAL SELECT DIGITAL I DTS When a DTS signal is input. 0 00 ISO 0 memo 0 0 O0 o o) =ID • SIGNAL SELECT is fixed in the "ANALOG" position for components not assigned to one of the four (three on VSX-D508) digital input jacks. • Because the audio from a karaoke microphone and LD recorded with analog audio only is not output from the digital output, set SIGNAL SELECT to "ANALOG". • This receiver can only play back Dolby Digital, PCM (32kHz, 44kHz, and 48kHz), DTS (VSX-D608 only) digital signal formats. With digital signal formats other than these, set SIGNAL SELECT to "ANALOG". • When an LD or CD player compatible with DTS is played back with SIGNAL SELECT set in "ANALOG", digital noise is output caused by playing back the DTS directly (no decoding). To prevent noise, you need to make digital connections (Refer to pages 20, 21) and set SIGNAL SELECT to "DIGITAL". • Some DVD players don't output DTS signals. For more details, refer to the instruction manual supplied with your DVD player. 29