Poulan PR4016 Owner Manual - Page 16
Troubleshooting
View all Poulan PR4016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
TROUBLESHOOTING WARNING! Always stop the unit and disconnect the spark plug before performing all of the recommended remedies below except remedies that require operation of the unit. TROUBLE: Engine will not start or will run only a few seconds after starting. CAUSE 1. Ignition switch off. 2. Engine flooded. 3. Fuel tank empty. 4. Spark plug not firing. 5. Fuel not reaching carburetor. REMEDY • See "STARTING" in the STARTING AND STOPPING section. • See "Starting a Flooded Engine" in the OPERATION section. • Fill tank with correct fuel mixture. See "FUELING THE ENGINE" in the STARTING AND STOPPING section. • Install new spark plug. See "SPARK PLUG" in the MAINTENANCE section. • Check for dirty fuel filter; replace. • Check for kinked or split fuel line; repair or replace. TROUBLE: Engine will not idle properly. CAUSE 1. Idle speed r e q u i r e s adjustment. 2. Carburetor requires adjustment. REMEDY • See "CARBURETOR ADJUSTMENT" in the MAINTENANCE Section. • Contact an authorized service dealer. TROUBLE: Engine will not accelerate, lacks power, or dies under a load. CAUSE 1. Air filter dirty. 2. Spark plug fouled. 3. Chain brake locked. 4. Carburetor requires adjustment. REMEDY • Clean or replace air filter. • Clean or replace plug and regap. • Unlock chain brake. See "STARTING POSITION" in the STARTING AND STOPPING section. • Contact an authorized service dealer. TROUBLE: Engine smokes excessively. CAUSE 1. Too much oil mixed with gasoline. REMEDY • Empty fuel tank and refill with correct fuel mixture. TROUBLE: Chain moves at idle speed. CAUSE 1. Idle speed r e q u i r e s adjustment. 2. Clutch requires repair. REMEDY • See "CARBURETOR ADJUSTMENT" in the MAINTENANCE Section. • Contact an authorized service dealer. 16