ProForm Endurance 720 E Instruction Manual - Page 26
How To Change Console Settings
View all ProForm Endurance 720 E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
HOW TO CHANGE CONSOLE SETTINGS 1. Select the settings mode. To select the settings mode, press the gear button. The settings information will appear in the display. 2. Navigate the settings mode. While the settings mode is selected, the matrix of the display will display several optional screens. Press the increase and decrease buttons next to the Enter button repeatedly to select the desired optional screen. The lower section of the display will show instructions for the selected screen. Make sure to follow the instructions shown in the lower part of the display. 3. Change settings as desired. Units-The currently selected unit of measurement will appear in the display. To change the unit of measurement, press the Enter button repeatedly. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. Incline System Calibration-If the incline system is not functioning properly, it may need to be calibrated. To calibrate the incline system, press the Quick Ramp increase or decrease button. The ramp will move upward and downward as it calibrates. When the ramp stops moving, the incline system is calibrated. Contrast Level-The currently selected contrast level will appear in the display. To adjust the contrast level, press the Quick Resistance increase and decrease buttons. Usage Information-The display will show the total number of hours that the elliptical has been used and the total distance (in miles or kilometers) that has been pedaled on the elliptical. Demo-The console features a demo mode, designed to be used if the elliptical is displayed in a store. Press the Quick Resistance increase button repeatedly to turn the demo mode on or off. 4. Exit the settings mode. Press the gear button to exit the settings mode. 26