ProForm Tdf 1.0 Instruction Manual - Page 11
has an L tag to the wire that has an L tag
View all ProForm Tdf 1.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Tip: Avoid pinching the wires during this step. 10 Attach the Handlebar (7) to the Handlebar Carriage (105) with four M6 x 16mm Screws (103); start all the Screws, and then tighten them. 103 7 105 Avoid pinching the wires 11. Tip: Avoid pinching the wires during this step. 11 Have a second person hold the Console (9) near the Handlebar Carriage (105). Connect the console wires to the Main Wire (68) and to the two wires (F) from the Handlebar (7); make sure to connect the console wire that has an "L" tag to the wire that has an "L" tag, and connect the console wire that has an "R" tag to the wire that has an "R" tag. Insert the excess wire into the Handlebar Carriage (105). Then, attach the Console (9) to the Handlebar Carriage (105) with four M4 x 12mm Screws (94); start all the Screws, and then tighten them. 9 Avoid pinching the wires 105 F 68 7 94 11