ProForm Tdf 1.0 Instruction Manual - Page 7

ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver Assembly may be easier if you have your own set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconsupport.eu on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have internet access, call Customer Service (see the front cover of this manual) and register your product. 2. Remove and discard the indicated shipping insert (A). If there are shipping screws in 2 the Rear Stabilizer (23), remove and discard A them. Attach the Rear Stabilizer (23) to the Base (1) with two M10 x 58mm Screws (74). 74 1 23 7