Pyle PKBRKTL200 Instruction Manual - Page 4

Male and female CamLock ttings CamLock levers. CamLock ttings. CamLock closing procedure. Reverse to release. Plastic Bottom The plastic bottom are attached underneath the brew kettle, covering the electronic components and the pump. This bottom can be removed by unscrewing the screws. This will give you access to the pump for maintenance and cleaning. The feet assure a enough space to di use the heat from the inside of base and protect the electronic device. Glass Lid Place the lid on the brew kettle during mashing in order to retain the heat within the mash. It is visible to watch inside of the kettle well. With the silicon hose connected to the riser pipe, the pump can be used to circulate the wort during mashing and lautering. Plastic Bottom The lid has an extra hole intended to be used in conjunction with a thermometer. This allows for measuring the temperature in the mash at the top of the kettle as the temperature here sometimes be di erent from that on the bottom where the built-in temperature sensor is located. Glass lid #2 Malt basket, #3 lifting handle and #4 lter screen: Place the malt basket with the lter screen inside the brew kettle before adding water and malt. 4 www.NutrichefKitchen.com Filter screen bottom in malt basket