RCA HSDB2A Quick Start Guide - Page 4

CONNECT & MOUNT THE POWER KIT (continued) 6 Join the power kit connection wires and the old chime leads. Wire nut Chime lead Twist Power kit wire lead Remove the sheaths covering the ends of the stranded-wire leads from the power kit. Put the ends of one power kit wire lead and one old chime lead together and insert them into a wire nut. Then twist the wire nut until you feel tension. Repeat with the other set of leads and wire nut. The end result will look something like the diagram below. Wire nuts Power kit Chime leads Power kit wire leads 7 Mount the power kit to the side of the chime box. Find a spot on the side of the chime box where the power kit will fit when the chime box's cover is put back on. Power kit Peel the cover off the top of the adhesive strip on the bottom of the power kit. Put the power kit where you want to mount it and press it in place until it's secure. 8 Put the cover from your doorbell's chime box back in place Put your chime box's cover back on. Chime box terminals REAR TRANS FRONT 4