RCA HSDB2A Quick Start Guide - Page 5
The Video Doorbell
View all RCA HSDB2A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
CONNECT & MOUNT THE VIDEO DOORBELL 1 Make sure the power to your doorbell's circuit is off Find the breaker that controls the circuit for your doorbell. Make sure it's off before you continue installation. 4 Insert the bubble level into the mounting plate Snap the bubble level into the slot on the front of the mounting plate you want to use. 2 Remove your existing doorbell Remove & unhook Carefully remove your existing doorbell from the wall. Then unhook your home's wiring from the doorbell's terminals. 3 Find the mounting plate option that works best Try the three mounting plate options where you want to mount the video doorbell. Choose the one that gives you the position and angle you want for your video doorbell. 5 Position the mounting plate and mark location Place the mounting plate where you want to mount it. Make sure that... (1) the center of the plate is over the hole where your home's doorbell wiring comes out, and (2) the mounting plate is level Use a marker or pencil to mark the top and bottom holes. Then take the mounting plate down. continues on the next page... 5