Radio Shack 63-1110 Owners Manual - Page 12
Connecting Ac Power
 |
UPC - 040293636906
View all Radio Shack 63-1110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
63-1110.fm Page 12 Friday, September 22, 2000 3:33 PM To mount the base (receiver) on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the back of the base. 1. Drill two horizontal pilot holes into the mounting surface, 3 inches (76 mm) apart. 2. Thread a screw into each hole until the screw's head extends about 1/4 inch from the wall. 3. Align the keyhole slots on the bottom of the base with the screw heads, then slide the base down to secure it. CONNECTING AC POWER Power the base (receiver) using the supplied 12V, 200 mA AC adapter. 12 Installation
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
 |
 |
12
Installation
To mount the base (receiver) on a wall, you need two
screws (not supplied) with heads that fit into the key-
hole slots on the back of the base.
1. Drill two horizontal pilot holes into the mounting
surface, 3 inches (76 mm) apart.
2. Thread a screw into each hole until the screw’s
head extends about
1
/
4
inch from the wall.
3.
Align the keyhole slots on the bottom of the base
with the screw heads, then slide the base down
to secure it.
CONNECTING AC POWER
Power the base (receiver) using the supplied 12V,
200 mA AC adapter.
63-1110.fm
Page 12
Friday, September 22, 2000
3:33 PM