Ricoh Aficio MP 5000B General Settings Guide - Page 18
Connecting to the Ethernet Interface
View all Ricoh Aficio MP 5000B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1. Connecting the Machine • If the optional Gigabit Ethernet board is installed, only the Ethernet interface and USB interface on the Gigabit Ethernet board can be used. 1 Connecting to the Ethernet Interface This section describes how to connect Ethernet interface cable to the Ethernet interface. • If the main power switch is on, turn it off. • Use the following Ethernet cables. • Unshielded Twisted Pair Cable (UTP) or Shielded Twisted Pair Cable (STP) and Category type 5 or more 1. Attach the supplied ferrite core at the machine end of the Ethernet interface cable. BBP011S 2. Make sure the main power switch of the machine is off. 3. Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port. BBM003S 4. Connect the other end of the Ethernet interface cable to a network connection device such as a hub. 16