Ricoh Aficio MP W5100en Support Guide - Page 9

Product Support Guide D046/D049 Installation Installation Requirements Temperature Range: 10 C to 32 C (50 F to 89.6 F) Humidity Range: 15% to 80% RH Ambient Illumination: Less than 1,500 lux (do not expose to direct sunlight) Ventilation: Ambient Dust: 3 times/hr/person Less than 0.075 mg/m3 (2.0 x 10-6oz/yd3) Avoid areas exposed to sudden temperature changes: Areas directly exposed to cool air from an air conditioner. Areas directly exposed to heat from a heater. Do not place machine where it will be exposed to corrosive gas or vapor. Do not install the machine at any location over 2,000m (6,500 ft.) above sea level. Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2") Do not place the machine where it may be subject to strong vibrations. Machine level Front to back: within 0.15mm/1000mm (0.006"/39.4") of level (use carpenter‟s Right to left: within 0.15mm/1000mm (0.006"/39.4") of level level) Power Requirements Input voltage level: 200V (208-240V) 15A 60HZ. Do not place anything on power cord. The required wall outlet is a NEMA 6-20R (receptacle) Space (in Millimeters) The recommended 750 mm (30") front space is sufficient to allow the paper tray to be pulled out. Additional front space is required to allow operators to stand at the front of the machine. SSScanner Separation Unit (parallel and L-shaped) Foot Print Dimensions (W x D x H): 1250 × 757 × 1200 mm, 49.2 x 29.8 x 47.2 in. Ver.1.07 Page 9 of 37 3/26/2010 Subject to change without notice