Ricoh Aficio SP 8200DN User Guide - Page 282
Click [IPP].
View all Ricoh Aficio SP 8200DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
1. Preparing for Printing 8. Double-click the printer name to display the printer settings. The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer model, and port. 1 9. Click [Port], and then click [Add]. 10. Click [SmartDeviceMonitor], and then click [OK]. 11. Click [IPP]. 12. In the [Printer URL] box, enter "http://printer's IP address/printer" as the printer's address. If the server authentication is issued, to enable SSL (a protocol for encrypted communication), enter "https://printer's IP address/printer" (Internet Explorer 5.01, or a higher version must be installed). (example IP address: 192.168.15.16) http://192.168.15.16/printer https://192.168.15.16/printer You can enter "http://printer's IP address/ipp" as the printer's address. 13. Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the one of any existing ports. If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name. 14. Click [Detailed Settings] to make necessary settings. For details about the settings, see SmartDeviceMonitor for Client Help. 15. Click [OK]. 16. Check that the port of the selected printer is displayed in [Port]. 17. Set a user code, if necessary. Up to 8 numeric characters can be entered. No alphabetic characters or symbols can be entered. 18. Select the [Default Printer] check box to configure the printer as default. 19. Click [Continue]. Installation starts. 20. After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish]. Restart the computer to complete the installation. • To stop installation of the selected software, click [Cancel] before the installation is complete. • Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory. • Setting a user code allows a SmartDeviceMonitor for Admin user to display and check the number of sheets each user prints. For details, see SmartDeviceMonitor for Admin Help. 28