Ricoh C811DN T1 Hardware Guide - Page 78
IEEE 802.11b (Wireless LAN) Configuration
![]() |
UPC - 026649028199
View all Ricoh C811DN T1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
4. Configuration IEEE 802.11b (Wireless LAN) Configuration Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel settings and their defaults. These items appear in the [Host Interface] menu. Setting Name Communication Mode 802.11 Ad hoc Default Channel 4 Communication Speed SSID WEP 13 11 Auto blank Off • Ethernet and wireless LAN (IEEE 802.11b) cannot be used at the same time. • To use IEEE 802.11b (Wireless LAN), set the following using the control panel: press the [Menu] key, and then select [Host Interface], [Network], [LAN Type], and then [IEEE 802.11b]. In addition, set the IP address, subnet mask, gateway address, DHCP, Frame Type (NW), and active protocol as explained in p.67 "Ethernet Configuration". 1. Press the [Menu] key. 76 ATU050S
![](/manual_guide/products/ricoh-aficio-sp-c811dn-hardware-guide-447c7df/78.png)