Ricoh C811DN T1 Hardware Guide - Page 81
Setting a WEP Key, When using 64-bit WEP
![]() |
UPC - 026649028199
View all Ricoh C811DN T1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
IEEE 802.11b (Wireless LAN) Configuration Setting a WEP Key If the wireless network uses WEP to encrypt transmitted data, the corresponding WEP key must be set to the printer to allow communications with other network devices. Ask the network administrator for the WEP key to use. 1. In the IEEE 802.11b menu, press the [ ] or [ ] key to select [Security Type], and then press the [OK] key. 4 2. Press the [ ] or [ ] key to select [WEP], and then press [Details]. When activating the WEP setting, you will need to enter the WEP key. If you have not entered the key, be sure to enter it. 3. The confirmation message appears. Press [Text]. 4. Press the [ ] or [ ] key to enter characters, and then press the [OK] key. • When entering a character, pressing [OK] will mask it with an asterisk for security reasons. • When using 64-bit WEP, up to 10 hexadecimal characters or five ASCll charasters can be entered. When using 128-bit WEP, up to 26 hexadecimal characters or 13 ASCll characters can be used. • Up to 10 or 26 hexadecimal characters and 5 or 13 ASCll characters can be entered. 79
![](/manual_guide/products/ricoh-aficio-sp-c811dn-hardware-guide-447c7df/81.png)