Ricoh C811DN T1 Hardware Guide - Page 89
Plain paper, Plain Paper]: Select [Plain] in [Paper Type].
UPC - 026649028199
View all Ricoh C811DN T1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Plain paper Paper thickness Printer setup Printer driver setup Supported paper feeding tray Paper capacity Duplex printing Additional cautions Paper Recommendations 60 to 105g/m2 (16 to 28lb.) • [Plain Paper]: 60 to 81g/m2 (16 to 28lb.) • [Middle Thick]: 82 to 105g/m2 (22 to 28lb.) • [Plain Paper]: Select [Paper Input] [Paper Type: XXX] (XXX: Tray 1 to 5, Bypass Tray) [Plain Paper]. • [Middle Thick]: Select [Paper Input] [Paper Type: XXX] (XXX: Tray 1 to 5, Bypass Tray) [Middle Thick]. • [Plain Paper]: Select [Plain] in [Paper Type]. • [Middle Thick]: Select [Middle Thick] in [Pa- 5 per Type]. Any input tray can be used. • Tray 1 or tray 2: 550 • Tray 3: 550 (500/1000-sheet paper feed unit) or 2000 (2000-sheet paper feed unit) • Tray 4 or tray 5: 550 • Bypass tray: 100 • Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides inside it. Supported When printing on the reverse side of plain paper that is already printed on, select [Paper Type:] [XXX] (XXX: Tray 1 to 5, Bypass Tray) [Plain:Dup.Back] using control panel or printer driver. 87