Ricoh Priport DX 4640PD Network Guide - Page 30
Printing with Windows, Printing with a Windows 2000/XP
View all Ricoh Priport DX 4640PD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using the Printer Function Printing with Windows Printing with a Windows 2000/XP, Windows Server 2003 or Windows NT 4.0 Print Server This section describes how to configure a client computer on a network using Windows 2000/XP, Windows Server 2003, Windows NT 4.0 Server or Windows NT 4.0 Workstation as a print server. When using a Windows 2000/XP, Windows Server 2003, or Windows NT 4.0 print server, select a shared printer on Windows 2000/XP, Windows Server 2003, or Windows NT 4.0. This section describes running [Add Printer Wizard] on each client computer, and adding the Windows 2000, Windows XP, Windows Server 2003, and Windows NT 4.0 print servers as the network printer. 5 These instructions are for Windows 98. AJK169S Limitation ❒ When using a print server connected to the printer with SmartDeviceMonitor for Client, you cannot use Recovery Printing and Parallel Printing. ❒ When using Windows XP as a print server, the client computer cannot receive notification of print job completion. Note ❒ This section assumes the client is already configured to communicate with a Win- dows 2000/XP, Windows Server 2003, or Windows NT 4.0 print server. Do not begin the following procedure until the client computer is set up and configured correctly. ❒ When using Windows NT 4.0 as the print server, make sure you install the Windows NT 4.0 printer driver before connecting the print server. There is a Windows NT 4.0 printer driver on the CD-ROM labeled "Printer Drivers and Utilities". 24