Ricoh Priport DX 4640PD Network Guide - Page 99
Changing the password, Enter passwd., Enter the current password.
View all Ricoh Priport DX 4640PD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Remote Maintenance by telnet ❖ Interface Priority Configuration You can assign priorities governing which interface obtains AutoNet parameters. msh> autonet priority interface_name Note ❒ Priority assignment is useful when connecting more than one interface to the printer. ❒ If an interface is not selected, the interface appears according to the currently set priority, regardless of multiple interface connections. Interface name Interface to be configured ether Ethernet interface wlan *1 IEEE 802.11b interface *1 Available when the IEEE 802.11b interface unit is installed. Reference For details about AutoNet, see p.97 "Using AutoNet". Changing the password Use the "passwd" command to change the remote maintenance password. Important ❒ Be sure not to forget or lose the password. Note ❒ The default password is "password". A Enter "passwd". msh> passwd 9 B Enter the current password. Old password: C Enter the new password. New password: Note ❒ The password must consist of three to eight alphanumeric characters and symbols. Passwords are case-sensitive. For example, "R" is different from "r". ❒ The password is the same as that used in configuring the network interface module with a Web Image Monitor and that used in NIB Setup Tool. If you change a password from telnet, the other passwords are also changed. D Enter the new password again. Retype new password: 93